Product Introduction ATT Series Classifier ADW Series Classifier ACS Series Classifier ACF Series Classifier ASL Series Classifier Ultra-fine ball mill Technical Hotline Tel：86 551 3439467 Fax：86 551 3439467 Mobile：13905694699
		Technological progress of powder industry has set an increasingly higher requirement for the quality of ultra-fine powder, especially for the products with D97＝2～5μm granularity. Therefore, we developed ATT Series Sub-micron Ultra-fine Classifier based on the advanced technology learnt from abroad.
		Function & characteristics   ● Technological progress of powder industry has set an increasingly higher requirement for the quality of ultra-fine powder, especially for the products with D97＝2～5μm granularity. Therefore, we developed ATT Series Sub-micron Ultra-fine Classifier based on the advanced technology learnt from abroad.   ● The specialized design used for 1250～7000 meshes ultra-fine classify produce.   ● They are suitable specially for coal-serial to fasten kaolin ratings after burn, instauration double 90, and wet method produce of the second micron product be dry behind of dozen spread ratings.   ● The point of incise is accurate without thick grain included in the product.   ● It adopt bump shot dispersion technique, which can fully disperse raw material before classification, solved the problems that micron powders are inclined to be reunited and difficult to classify.   ● This classify system adopts grain degree on-line examination and DCS automation control systems, which ensures the stability of product quality. The realm of application   Extensive application in various powder with high additional value (like porcelain and ceramics, medicine, agrochemical, whet to anticipate etc.) classify produce, and various micron powder processing such as non-metal mineral tiny powder(Gaoline, calcite, Soapstone etc). Main technical parameters
		Specifications Model ATT 200 ATT 360 ATT 510 ATT 610 ATT 720 Processing Ability (t/h) ≤ 2 ≤ 4 ≤ 8 ≤ 11 ≤ 15 Regulation range D97 (μm) 2～10 2～10 3～10 5～10 5～10 Output (kg/h) D97 = 2μm 30 120 200 / / D90 = 2μm 100 150 380 / / D97 = 4μm 150 260 450 / / D97 = 5μm 180 5500 900 1100 1500 D97 = 8μm 300 800 1200 1700 2600 D97 = 10μm 400 900 1800 2600 3400 Pack machine power (kW) 55 75 160 245 315 Design breeze quantity (m³/h) 3000 7500 15000 22000 28000
		The picture of analysis granularity of ATT Series Sub-micron Ultra-fine Classifier
		The ATT classifier is used on the spot

Copyright © Department of Ultra-fine Technology, Hefei Cement Research & Design Institute All rights reserved Address：60 Wangjiang East Road, Hefei, Anhui Province. Postal Code：230051 Wan ICP Record No.05001553